 |
 |
| Lighting |
Lighting - Step into a dark hall and have the lights automatically turn on because a motion sensor was tripped. If the time is after midnight and before 6:00 AM, the lights may be set to come on at a 30% dimmed level.
Schedule indoor and outdoor lighting for a lived-in look when away. When you open the front door after dark and the front light is not on, the front light is automatically turned on. Have the front door and driveway lights turn on automatically at dusk. Have all lights turned on in the house in the event of a security alarm or fire. Call your home using your cell phone to have it run a program to turn on specified lights when you are five minutes from home. Dial into your home from the office and turn off any lights that were accidentally left on when you went to work. Set mood lighting by pushing one button as per situation movie time, good morning mode, good night mode, relax mood etc.
What do lighting controls consist of? Lighting consists of either stand alone components or connected to a home control lighting system. Check with your representative from Network and Automation to find the system that meets your needs. Dimmers- to reduce wattage of lamps and increase their service life Photocells- to turn lights on and off in response to natural light levels Occupancy- sensors to automatically turn lights on when a person enters a room and turn them off when the room is vacated Keypads- mounted on walls, desktops, bed tables or wherever required Portable touchscreens- wireless touch pads can be set up anywhere in the home or business Scene Switch - Control all lights in a room or area. Lights may be turned on, off, dimmed, brightened, and set to multiple different scenes to provide limitless options for both security and aesthetic lighting in your home, The buttons on this switch may be custom engraved so that you can name the scene that each button controls. House Status Switches - To be useds with a home control system, this master lighting control shows the status of up to 8 rooms. If the switch indicates lights on in any of the areas, you can uses the switch to turn off those lights in unoccupied rooms. Custom engraving of the buttons is available , allowing you to name the rooms the switch is monitoring.
|
|
|
 |
